How to fix your Quark Pegboard?
Two models, two uses… and two slightly different installation methods.
The Pegboard P18 — Robust and powerful
Thickness: 18 mm
✅ High resistance
✅ Ideal for heavy loads
✅ Perfect for professionals and intensive use
The Pegboard P9 — Light and decorative
Thickness: 9 mm
✅ Twice as light
✅ More economical
✅ Perfect for small items and wall decoration
💡 The Pegboard P9 requires additional parts that come with the kit.
5-step installation (common to both models)
1. Prepare the screws
🔧 Lightly tighten the 4 screws in the corners of the Pegboard with the provided Torx10 key.
➡️ Leave 1 to 2 mm protruding.
(Image suggestion: screws pre-positioned on the back of the Pegboard)
2. Position the Pegboard
🧱 Place it on the wall in the desired location.
📐 Use a level to align it horizontally or vertically.
3. Mark the wall
🔨 Hold the Pegboard in place and lightly tap the screw heads to mark the drilling points.
4. Drill the holes
🛠️ Remove the Pegboard.
Drill the marks with a 6 mm drill bit.
5. Insert the dowels
👊 Hammer the nylon anchors into the holes.
-
Additional Steps for the Pegboard P9
5-a. Fix parts 9A
🧩 Screw the 3D printed 9A flat inserts to the back of the Pegboard using two small screws, according to the provided diagram.
5-b. Position the 9B pieces
🧲 Place the 9B cylindrical inserts at the 4 corners and in the center of the Pegboard.
These pieces ensure the correct distance between the wall and the panel.
-
6. Attach the Pegboard
🔩 Align the Pegboard with the dowels and screw until the corners are flush against the wall.
🔧 Use the provided Allen key to finish tightening.
💡 No need to overtighten: the fit is guaranteed.
